{"id":595,"date":"2026-05-29T01:53:27","date_gmt":"2026-05-29T01:53:27","guid":{"rendered":"https:\/\/planetary-gearboxes.com\/?post_type=product&p=595"},"modified":"2026-05-29T01:53:27","modified_gmt":"2026-05-29T01:53:27","slug":"ep-afr-right-angle-high-rigidity-planetary-gearbox","status":"publish","type":"product","link":"https:\/\/planetary-gearboxes.com\/es\/producto\/ep-afr-right-angle-high-rigidity-planetary-gearbox\/","title":{"rendered":"EP-AFR Series Right-Angle High-Rigidity Output Shaft Planetary Gearbox (EP-AFR042 to EP-AFR220, and EP-AFXR Variant)"},"content":{"rendered":"

<\/main><\/p>\n
\n

EP-AFR Series \u2014 Right-Angle High-Rigidity Output Shaft Planetary Gearbox<\/h2>\n
\n
\n

\"EP-AFR<\/p>\n

\n
\n
Hi Radial
\nLoad + 90\u00b0<\/div>\n
Only right-angle series<\/div>\n<\/div>\n
\n
\u22641′<\/div>\n
Backlash P0 (arcmin)<\/div>\n<\/div>\n
\n
\u226597%<\/div>\n
Single-Stage Efficiency<\/div>\n<\/div>\n
\n
AFR042
\n\u2013220<\/div>\n
11 frame sizes<\/div>\n<\/div>\n<\/div>\n

\n\u2190 Explorar todas las series de engranajes planetarios
\n<\/a><\/div>\n<\/div>\n
\n
\n
\u2605 The Only Right-Angle Series in the Korea Ever-Power Range Rated for Hi Radial Load<\/div>\n

EP-ABR, EP-ADR, and EP-AER all deliver standard output shaft radial load capacity at 90 degrees. EP-AFR is the sole right-angle series in the Korea Ever-Power precision planetary gearbox range with an enlarged diameter high-rigidity output shaft<\/strong> \u2014 the same structural property that distinguishes the EP-AF inline series<\/a> from EP-AB, now applied to a right-angle output configuration.<\/p>\n<\/div>\n

El EP-AFR series right-angle high-rigidity planetary gearbox<\/strong> is the product specified when a machine design simultaneously requires a 90-degree direction change<\/strong> between the motor and the load, and direct shaft-end mounting<\/strong> of a gear, pulley, sprocket, or cam that imposes radial force on the output shaft. Where the EP-ABR right-angle series<\/a> uses a standard-diameter shaft suitable for coupling-connected loads, EP-AFR’s enlarged shaft handles the combined bending and torsion loading of direct-mounted transmission components at the right-angle output \u2014 without a separate bearing housing to carry the radial load.<\/p>\n

All P0\/P1\/P2 backlash grades, the complete i=3\u201310 single-stage range, and all 17 two-stage ratios from i=12 to i=100 are available across all eleven EP-AFR frames. The EP-AFXR variant<\/strong> provides the same high-rigidity right-angle specification up to 1,200 N\u00b7m in ten frame sizes (no AFXR220).<\/p>\n

\n
\n
\u26a1 Enlarged Shaft + 90\u00b0<\/div>\n
Direct radial-load mounting at the right-angle output.<\/div>\n<\/div>\n
\n
\ud83d\udcd0 P0\/P1\/P2<\/div>\n
Same three precision grades as EP-AF and EP-ABR.<\/div>\n<\/div>\n
\n
\ud83d\udce6 + AFXR<\/div>\n
Same spec up to 1,200 N\u00b7m, AFR042\u2013AFR180 frames.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Right-Angle Output With Radial Load \u2014 Why the Shaft Must Be Enlarged<\/h2>\n
\n

<\/p>\n

\n
\n

EP-ABR \u2014 STANDARD SHAFT RIGHT-ANGLE<\/p>\n

[Motor]\u2500\u2500[Gearbox]
\n\u2502 Standard shaft \u00d8
\n\u25bc 90\u00b0 output
\n[Coupling]\u2500\u2500[Load]
\nNo radial force on shaft<\/div>\n

EP-AFR \u2014 ENLARGED SHAFT RIGHT-ANGLE<\/p>\n

[Motor]\u2500\u2500[Gearbox]
\n\u2502 Enlarged shaft \u00d8
\n\u25bc 90\u00b0 output
\n\u2699 [Gear\/Pulley\/Cam]
\n\u2190 Radial force F
\nBending stiffness \u221d \u00d8\u2074<\/div>\n
EP-AFR carries both the torque y<\/em> the radial force at the right-angle output \u2014 no separate bearing housing<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

The difference between EP-ABR and EP-AFR is the output shaft structural capacity. When the right-angle output shaft transmits only torque to a coupling-connected load, the standard shaft of EP-ABR is the correct and cost-appropriate specification. When the right-angle output shaft must simultaneously carry torque and radial force<\/strong> because a transmission component is mounted directly on the shaft end, EP-AFR’s enlarged shaft is the mechanically correct choice.<\/p>\n

\n
\n

\u2460 Right-Angle Belt Drive \u2014 Tension Creates Radial Force at 90\u00b0<\/strong><\/p>\n

A timing belt pulley mounted on the EP-AFR right-angle output shaft generates belt tension as a radial force \u2014 at 90 degrees to the motor input axis. Packaging machines, labelling units, and printing register drives where the motor is perpendicular to the belt-driven axis use EP-AFR for this exact layout. The enlarged shaft resists the bending moment from belt tension at the right-angle output without deflection that would misalign the pulley and degrade belt-mesh accuracy.<\/p>\n<\/div>\n

\n

\u2461 Right-Angle Open Gear Pair \u2014 Mesh Force in Perpendicular Plane<\/strong><\/p>\n

When a spur or helical gear is mounted directly on the EP-AFR right-angle output shaft as part of an open gear pair, the gear mesh separating force acts in a plane perpendicular to the motor input axis. EP-AFR’s enlarged shaft carries this radial mesh force at the 90-degree output without a separate outboard bearing housing \u2014 eliminating a component that would otherwise be required to protect the standard output shaft of EP-ABR from premature bearing fatigue.<\/p>\n<\/div>\n

\n

\u2462 Right-Angle Sprocket and Cam Drives \u2014 Offset Load at 90\u00b0<\/strong><\/p>\n

Chain sprockets and eccentric cams mounted on the EP-AFR right-angle output shaft impose chain tension and eccentric mass bending moments at the 90-degree output. For Korean automated transport conveyors where the motor is positioned perpendicular to the conveyor chain axis, EP-AFR provides the right-angle direction change and the shaft structural capacity to carry the chain tension as a radial load \u2014 simultaneously, in one unit.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

EP-AFR vs EP-ABR \u2014 The Single Decision: How Does the Load Connect?<\/h3>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n
Load Connection at 90\u00b0 Output<\/th>\n\u2192 EP-AFR \u2605<\/th>\n\u2192 EP-ABR<\/th>\n<\/tr>\n<\/thead>\n
Load mounting method<\/td>\nDirect shaft-end \u2014 gear, pulley, sprocket, cam<\/td>\nFlexible coupling to load shaft<\/td>\n<\/tr>\n
Radial force on output shaft<\/td>\nPresent \u2014 belt tension, gear mesh, chain tension<\/td>\nMinimal \u2014 coupling absorbs misalignment<\/td>\n<\/tr>\n
Di\u00e1metro del eje de salida<\/td>\nEnlarged \u2014 high-rigidity, higher radial capacity<\/td>\nStandard diameter<\/td>\n<\/tr>\n
Separate bearing housing needed?<\/td>\nNo \u2014 enlarged shaft carries radial load directly<\/td>\nMay be needed if radial load is significant<\/td>\n<\/tr>\n
Output direction<\/td>\nIdentical \u2014 90\u00b0 right-angle in both series<\/td>\n<\/tr>\n
Backlash \/ Efficiency \/ IP<\/td>\nIdentical \u2014 P0\/P1\/P2 \u00b7 \u226597% \u00b7 \u221210 to +90 \u00b0C \u00b7 IP65<\/td>\n<\/tr>\n
Ratios available<\/td>\nIdentical \u2014 i=3\u201310 single-stage, i=12\u2013100 two-stage<\/td>\n<\/tr>\n
Frame size scale<\/td>\nNote: AFR uses AF scale (075\/100\/140), ABR uses AB scale (090\/115\/142) \u2014 not interchangeable<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\u25b8 Selection rule: <\/span>
\nIf the load at the right-angle output connects via a flexible coupling and the shaft carries only torque, specify EP-ABR. If the load is mounted directly on the 90-degree output shaft end \u2014 gear, belt pulley, sprocket, cam \u2014 and the shaft must carry both torque and radial force, specify EP-AFR. The precision grade (P0\/P1\/P2) and ratio selection are identical between the two series; the decision is made on shaft load type alone.<\/span><\/div>\n<\/section>\n

<\/p>\n

\n

EP-AFR vs EP-AF \u2014 Right-Angle vs Inline, Same High-Rigidity Shaft<\/h2>\n

EP-AFR and EP-AF are the right-angle and inline versions of the same high-rigidity shaft product concept. The output shaft diameter, the radial load capacity, the P0\/P1\/P2 backlash grades, and the complete ratio set are the same across both series. The single structural difference is the output direction. Choose EP-AF when the motor and load can be arranged coaxially. Choose EP-AFR when machine layout requires the motor axis to be perpendicular to the load axis.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n
Property<\/th>\nEP-AFR (right-angle)<\/th>\nEP-AF (inline)<\/th>\n<\/tr>\n<\/thead>\n
Output direction<\/td>\n90\u00b0 to motor input axis<\/td>\nCoaxial with motor input<\/td>\n<\/tr>\n
Output shaft<\/td>\nEnlarged diameter \u2014 high-rigidity, hi radial load capacity (identical in both)<\/td>\n<\/tr>\n
Backlash \/ Efficiency \/ IP<\/td>\nIdentical \u2014 P0\/P1\/P2 \u00b7 \u226597% \u00b7 \u221210 to +90 \u00b0C \u00b7 IP65<\/td>\n<\/tr>\n
Relaciones de transmisi\u00f3n<\/td>\nIdentical \u2014 i=3\u201310 single, i=12\u2013100 two-stage<\/td>\n<\/tr>\n
Frame sizes<\/td>\nAFR\/AF use the same scale: 042\/060\/075\/100\/140\/180\/220<\/td>\n<\/tr>\n
Max torque<\/td>\n2,000 N\u00b7m (AFR220 \/ AF220)<\/td>\n<\/tr>\n
Choose when<\/td>\nMotor must be perpendicular to load axis<\/td>\nMotor and load share a common axis<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\u25b8 Frame number note: <\/span>
\nEP-AFR and EP-AF use the same body diameter scale (075, 100, 140 as middle frames), which is different from the EP-ABR\/EP-AB scale (090, 115, 142). An EP-AFR075 and an EP-ABR075 are not<\/strong> the same physical size \u2014 always verify the dimensional drawing when substituting between AFR and ABR at nominally similar frame numbers.<\/span><\/div>\n<\/section>\n

<\/p>\n

\n

EP-AFR and EP-AFXR \u2014 Complete Specifications<\/h2>\n
\n

<\/p>\n

\n

EP-AFR \u2014 Full Range<\/h3>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
EP-AFR Specifications<\/td>\n<\/tr>\n
Torque (T2N)<\/td>\n14 \u2013 2,000 N\u00b7m<\/td>\n<\/tr>\n
Output direction<\/td>\n\u00e1ngulo recto de 90\u00b0<\/td>\n<\/tr>\n
Output shaft<\/td>\nEnlarged \u2014 high-rigidity, hi radial load<\/td>\n<\/tr>\n
Brida de salida<\/td>\nSquare \u2014 same geometry as EP-AF inline<\/td>\n<\/tr>\n
P0 backlash<\/td>\nSimple \u22641\u2032 \u00b7 De dos etapas \u22643\u2032<\/td>\n<\/tr>\n
P1 backlash<\/td>\nSimple \u22643\u2032 \u00b7 De dos etapas \u22645\u2032<\/td>\n<\/tr>\n
P2 backlash<\/td>\nSimple \u22645\u2032 \u00b7 De dos etapas \u22647\u2032<\/td>\n<\/tr>\n
Single-stage ratios<\/td>\n3\/4\/5\/6\/7\/8\/9\/10 (complete)<\/td>\n<\/tr>\n
Two-stage ratios<\/td>\n12\/15\/16\/20\/25\/28\/30\/32\/
\n35\/40\/45\/50\/60\/70\/80\/90\/100<\/td>\n<\/tr>\n
Eficiencia<\/td>\n\u226597% (1-stage) \u00b7 \u226594% (2-stage)<\/td>\n<\/tr>\n
Temperature<\/td>\n\u221210 \u00b0C to +90 \u00b0C<\/td>\n<\/tr>\n
IP rating<\/td>\nIP65 standard<\/td>\n<\/tr>\n
Frame sizes<\/td>\nAFR042\/060\/060A\/075\/075A\/
\n100\/100A\/140\/140A\/180\/220<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

\n

EP-AFXR \u2014 Reduced Torque Variant<\/h3>\n\n\n\n\n\n\n\n\n\n
EP-AFXR Specifications<\/td>\n<\/tr>\n
Torque (T2N)<\/td>\n14 \u2013 1,200 N\u00b7m<\/td>\n<\/tr>\n
Frame sizes<\/td>\nAFXR042\/060\/060A\/075\/075A\/
\n100\/100A\/140\/140A\/180
\n(no AFXR220)<\/span><\/td>\n<\/tr>\n
Output shaft<\/td>\nSame enlarged shaft as AFR<\/td>\n<\/tr>\n
All other specs<\/td>\nIdentical to EP-AFR<\/td>\n<\/tr>\n
Choose AFXR when<\/td>\nOutput torque \u22641,200 N\u00b7m and AFR220 frame is unnecessarily large; AFXR180 is the maximum<\/td>\n<\/tr>\n
Choose AFR when<\/td>\nOutput torque exceeds 1,200 N\u00b7m, or AFR220 is specifically required<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
\n

Nota:<\/strong> At frames 042\u2013180, AFXR and AFR have identical physical dimensions \u2014 same enlarged shaft geometry, same flange, same ratios. Only the torque rating and the absence of the 220 mm frame differ.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Model Designation Guide \u2014 EP-AFR and EP-AFXR<\/h2>\n
\n
EP-AFR 100 \/ 25 \/ S2 \/ P1<\/div>\n
EP-AFXR 100 \/ 25 \/ S2 \/ P1 \u2190 reduced-torque variant<\/div>\n
\n
\n
EP-AFR<\/div>\n
Right-Angle
\nHigh-Rigidity Shaft
\nAFXR = \u22641,200 N\u00b7m<\/div>\n<\/div>\n
\n
100<\/div>\n
Body 100 mm
\n(AF scale \u2014 \u2260 AB115
\nverify drawings)<\/div>\n<\/div>\n
\n
25<\/div>\n
Gear ratio i=25:1
\n(two-stage)<\/div>\n<\/div>\n
\n
S2<\/div>\n
S1: smooth shaft
\nS2: with keyway<\/div>\n<\/div>\n
\n
P1<\/div>\n
P0 \u22641′ \/ P1 \u22643′
\nP2 \u22645′ (single-stage)<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Applications \u2014 Right-Angle Direct Shaft Mounting in Korean Industry<\/h2>\n
\n
\n

Packaging Machine Corner Drives \u2014 Right-Angle Belt<\/h3>\n

Korean VFFS and HFFS packaging machine designs frequently locate the forming tube drive motor perpendicular to the film-pull belt axis, reducing machine height and allowing the motor to be positioned in the bottom cabinet. EP-AFR provides the 90-degree direction change from the perpendicular motor to the timing-belt-driven film-pull rollers \u2014 with the enlarged shaft carrying the belt tension radial force at the right-angle output. AFR075 and AFR100 P1 at i=5\u201325 cover the majority of Korean VFFS film-pull drive requirements. Pairs with precision CV drive shafts for dual-motor configurations requiring torque sharing between two AFR units.<\/p>\n<\/div>\n

\n

Printing Register Corner Gear Drive \u2014 P0 Right-Angle<\/h3>\n

Korean web-fed printing press register correction axes that use an open gear pair at 90 degrees to the servo motor \u2014 motor mounted across the press width, gear-driven register roller perpendicular \u2014 require a right-angle gearbox that carries the gear mesh separating force at the right-angle output shaft without deflection. EP-AFR075 P0 at i=10\u201332 serves Korean offset and flexographic press register axes, where the \u22641 arcmin P0 grade prevents backlash-induced colour register variation and the enlarged shaft maintains gear centre distance constancy through press-speed transients.<\/p>\n<\/div>\n

\n

Conveyor Corner Chain Drive \u2014 Right-Angle Sprocket<\/h3>\n

Korean automated assembly and logistics conveyor systems that change direction at a 90-degree corner use EP-AFR to drive the chain sprocket at the corner station \u2014 the servo motor is perpendicular to the conveyor chain axis, and the sprocket is mounted directly on the EP-AFR right-angle output shaft. Chain tension acts as a radial force on the output shaft; the enlarged shaft absorbs this without an outboard bearing housing at the corner station, reducing the conveyor corner unit’s axial depth and maintenance schedule.<\/p>\n<\/div>\n

\n

CNC Machine Tool Auxiliary Drives \u2014 Right-Angle at Tight Spaces<\/h3>\n

Korean machining centre chip conveyor drives and coolant pump drives positioned inside the machine column use EP-AFXR at small frame sizes (042, 060) where the motor must be perpendicular to the conveyor or pump shaft in a constrained machine cavity. The enlarged shaft carries the impeller or auger shaft radial load directly at the 90-degree right-angle output \u2014 eliminating the separate bracket-mounted bearing that would otherwise be required in the confined machine base space.<\/p>\n<\/div>\n

\n

Textile Corner Drives \u2014 Right-Angle Winding Roll<\/h3>\n

Korean knitting and weaving machine winding roll drives where the motor cannot be positioned behind the roll axis \u2014 machine structural members block the axial direction \u2014 use EP-AFR to place the motor alongside the machine frame perpendicular to the roll axis. The large winding roll is mounted directly on the AFR right-angle output shaft; its weight acts as a static radial force and its rotating mass adds a dynamic radial component. AFR140 P1 at i=20\u201350 covers Korean industrial textile winding machine torque requirements at this layout. Self-locking holding via worm gear reducers for vertical roll configurations.<\/p>\n<\/div>\n

\n

Agricultural Seeder Head \u2014 Right-Angle Direct Disc Mount<\/h3>\n

Korean precision agriculture seeder head drives where the seeder disc is mounted directly on a right-angle output shaft \u2014 the servo motor positioned along the boom frame, the seeder disc rotating perpendicular to it \u2014 use EP-AFXR for the compact right-angle high-rigidity drive. The disc weight and seed distribution reaction force act as a radial load on the right-angle shaft; the enlarged shaft absorbs this. Integration with agricultural bevel gearboxes for multi-row seeder configurations extends the single EP-AFXR output to multiple seeder heads.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Certificaciones de calidad y normas de ensayo<\/h2>\n
\n
\n
\n
\n
ISO 9001<\/div>\n
Gesti\u00f3n de la calidad<\/div>\n<\/div>\n
\n
CE<\/div>\n
Directiva de Maquinaria de la UE<\/div>\n<\/div>\n
\n
Kansas<\/div>\n
Norma industrial coreana<\/div>\n<\/div>\n
\n
RoHS<\/div>\n
Libre de sustancias peligrosas<\/div>\n<\/div>\n<\/div>\n