{"id":952,"date":"2026-06-18T07:36:44","date_gmt":"2026-06-18T07:36:44","guid":{"rendered":"https:\/\/planetary-gearboxes.com\/?post_type=product&p=952"},"modified":"2026-06-18T07:36:44","modified_gmt":"2026-06-18T07:36:44","slug":"413w3-winch-drive-planetary-gearbox-reducer","status":"publish","type":"product","link":"https:\/\/planetary-gearboxes.com\/fr\/produit\/413w3-winch-drive-planetary-gearbox-reducer\/","title":{"rendered":"R\u00e9ducteur plan\u00e9taire pour entra\u00eenement de treuil 413W3"},"content":{"rendered":"
\n

<\/p>\n

\n

413W3 \u2014 42,500 Nm and the First 610 Nm Brake in the Catalogue<\/h2>\n
\n
\n

Every winch drive planetary gearbox<\/a> below the 413W3 uses a brake rated at 530 Nm or less. The EP-413W3 is where that ceiling breaks. The 610 Nm multi-disc brake is not simply a stronger spring pack in the same housing \u2014 it is a redesigned brake assembly with a larger piston diameter, additional friction discs, and a heavier Belleville spring stack that produces 15% more clamping force than the 530 Nm design.<\/p>\n

At 42,500 Nm through ratios 86-172 and 450 kg dry weight, the 413W3 serves the ultra-heavy tier: offshore construction vessel main hoists handling 40-60 tonne subsea structures, mining production winders cycling 15-tonne ore skips through 400-metre shafts at sustained duty rates, and the largest construction tower cranes where the main hoist torque requirement exceeds everything the 407 and 410 families can provide.<\/p>\n<\/div>\n

\n

\"413W3<\/p>\n

\n
\n
42,500<\/div>\n
Nm Torque<\/div>\n<\/div>\n
\n
610<\/div>\n
Nm Brake (NEW)<\/div>\n<\/div>\n
\n
86-172<\/div>\n
Rapports<\/div>\n<\/div>\n
\n
450 kg<\/div>\n
3 \u00e9tapes<\/div>\n<\/div>\n<\/div>\n
FEM M5<\/span>
\n3,500 RPM<\/span>
\n95% Eff.<\/span><\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

413W3 Winch Drive Planetary Gearbox \u2014 Technical Parameters<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Couple de sortie nominal<\/td>\n42 500 Nm<\/td>\n<\/tr>\n
Plage de rapports de transmission<\/td>\n86 to 172 (three-stage planetary)<\/td>\n<\/tr>\n
vitesse d'entr\u00e9e maximale<\/td>\n3,500 rpm<\/td>\n<\/tr>\n
Maximum output speed<\/td>\n25 rpm (FEM M5 continuous duty)<\/td>\n<\/tr>\n
efficacit\u00e9 m\u00e9canique<\/td>\n\u2265 95%<\/td>\n<\/tr>\n
Frein de stationnement<\/td>\n610 Nm, multi-disc, spring-applied, hydraulic release<\/td>\n<\/tr>\n
Brake at drum (ratio-dependent)<\/td>\n52,460 Nm (r=86) to 104,920 Nm (r=172)<\/td>\n<\/tr>\n
Montage<\/td>\nRotating housing flanges<\/td>\n<\/tr>\n
poids sec<\/td>\nApprox. 450 kg<\/td>\n<\/tr>\n
Lubrification<\/td>\nOil bath splash, EP gear oil<\/td>\n<\/tr>\n
Temp\u00e9rature de fonctionnement<\/td>\n-20 to +85 deg C<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Above 530 Nm \u2014 What Changed in the Brake Design to Reach 610<\/h2>\n

The 530 Nm brake used across the 407-410 families reached its architectural limit \u2014 stronger springs within the same piston diameter would require release pressures beyond the capacity of standard pilot circuits. The 413W3 610 Nm brake solves this through three physical changes, not one.<\/p>\n

\"R\u00e9ducteur<\/p>\n

\n
\n

Larger Piston Diameter<\/strong><\/p>\n

The brake piston diameter increases by approximately 15% compared to the 530 Nm design. A larger piston means the same hydraulic release pressure produces more force \u2014 keeping the release pressure within the 30-40 bar range that standard pilot circuits provide, despite the stronger spring pack. Without this diameter increase, the 610 Nm spring pack would require 45-50 bar to release \u2014 exceeding many crane hydraulic systems.<\/p>\n<\/div>\n

\n

Additional Friction Disc<\/strong><\/p>\n

The 610 Nm brake stack contains one additional friction disc compared to the 530 Nm design. The extra disc increases the total friction surface area by approximately 20%, which means the same clamping force produces more holding torque per unit of spring compression. The additional disc also reduces the contact pressure per disc face, extending the disc life \u2014 a critical consideration at the torque levels where the 413W3 operates.<\/p>\n<\/div>\n

\n

Redesigned Spring Stack<\/strong><\/p>\n

The Belleville disc spring stack uses a different disc thickness and stacking arrangement to produce 15% more force at the same deflection range. The spring rate curve is matched to the larger piston so that the release characteristic (progressive engagement, not snap-on) is maintained. This ensures the 610 Nm brake engages with the same controlled, progressive torque ramp as the 530 Nm design \u2014 preventing shock loading of the cable and suspended load during emergency stops.<\/p>\n<\/div>\n<\/div>\n

Parts compatibility note: <\/span>
\nThe 610 Nm brake assembly is NOT interchangeable with the 430\/530 Nm assemblies used in the 406-410 families. The piston, disc stack, spring pack, and housing bore are all different dimensions. Do not attempt to install 530 Nm components into a 413W3 \u2014 the brake torque will be approximately 15% below specification, which may violate the crane certification safety factor.<\/span><\/div>\n<\/section>\n

<\/p>\n

\n

Ratios 86-172 \u2014 The Machines at 42,500 Nm Are All Slow-Hoist Applications<\/h2>\n

The 413W3 ratio range starts at 86 \u2014 higher than the 410W3 minimum of 62. This is not a geometric constraint. It is an acknowledgement that no machine operating at 42,500 Nm of drum torque needs a fast hoist speed.<\/p>\n

\n
\n

The motor argument<\/strong><\/p>\n

At ratio 62, the motor input torque would be 42,500 \/ 62 = 685 Nm \u2014 requiring over 1,200 cc\/rev at 350 bar. No standard single-shaft motor produces this. Even a dual-motor Y-adapter would need two 600 cc\/rev motors \u2014 at the absolute ceiling of axial piston technology. At ratio 86, the input torque drops to 494 Nm \u2014 achievable with dual 440 cc\/rev motors, which are large but available catalogue items. The ratio floor of 86 exists because the motors below this ratio are impractically large.<\/p>\n<\/div>\n

\n

The application argument<\/strong><\/p>\n

At ratio 86 on a 600 mm PCD drum with 3,000 rpm motor input: drum speed = 34.9 rpm, line speed = 65.8 m\/min. This is already faster than any 40-tonne crane hoist actually operates \u2014 real-world heavy lifting at this load class runs at 5-20 m\/min. The ratio range of 86-172 covers every practical hoisting speed for loads in the 30-60 tonne class. Ratios below 86 would produce line speeds that no crane operator or classification standard would permit at these load weights.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

42,500 Nm \u2014 Where the 610 Nm Brake Meets Ultra-Heavy Lifting<\/h2>\n

\"413W3<\/p>\n

\n
\n

Offshore Construction Vessel Main Hoists (40-60 t)<\/h3>\n

Main hoist on dedicated offshore construction cranes deploying large subsea structures \u2014 Christmas trees, manifolds, and protection frames \u2014 at water depths up to 500 metres. The 610 Nm brake provides the enhanced holding capacity that classification societies (DNV, BV, ABS) require when the combined weight of the payload and 500 metres of wire rope exceeds the 530 Nm brake holding envelope of the 410W3. The slewing drive<\/a> handles the crane rotation on the same vessel.<\/p>\n<\/div>\n

\n

Mining Production Hoists<\/h3>\n

Ore skip winders and cage hoists at mines with shaft depths of 300-500 metres and production rates of 200-400 skip cycles per day. The 413W3 at ratio 120-172 delivers the drum torque for 10-15 tonne skip loads plus the cable weight at full depth, while the 610 Nm brake holds the loaded skip at any point in the shaft \u2014 including the emergency stop scenario where the skip must halt instantly during free-fall descent after a control system failure. Mining safety regulations treat the brake as the last barrier against a skip drop \u2014 the 610 Nm design margin exists for this reason.<\/p>\n<\/div>\n

\n

Heavy Industrial Overhead Cranes (30-50 t)<\/h3>\n

Main hoist mechanisms on heavy-duty overhead travelling cranes in steelworks, power stations, and heavy manufacturing plants handling 30-50 tonne loads at FEM M5-M6 duty rates. The 413W3 at ratio 86-110 provides the torque for production lifting, and the 610 Nm brake holds loads suspended during the extended holding periods that steelworks operations<\/a> demand \u2014 sometimes 30+ minutes while furnace tapping, ladle positioning, or mould preparation is completed.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

The Ultra-Heavy Winch Drive Catalogue<\/h2>\n
\n
\n

\"Winch<\/p>\n

\n

Full Winch Drive Range \u2192<\/a><\/h3>\n

414W3 (140,000 Nm) to 419W3 (330,000 Nm) \u2014 the mega-class for the largest cranes and winders on Earth.<\/p>\n<\/div>\n<\/div>\n

\n

\"Slewing<\/p>\n

\n

R\u00e9ducteur plan\u00e9taire \u00e0 entra\u00eenement de rotation \u2192<\/a><\/h3>\n

ZR series for ultra-heavy offshore crane rotation and large industrial crane slewing.<\/p>\n<\/div>\n<\/div>\n

\n

\"Wheel<\/p>\n

\n

Wheel Drive Planetary Gearbox \u2192<\/a><\/h3>\n

EP heavy-duty series for crane gantry travel, mining truck propulsion, and port equipment mobility.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Winch Drive Planetary Gearbox \u2014 Ultra-Heavy 610 Nm Brake FAQ<\/h2>\n
\n
\n

Why does the 413W3 use 610 Nm instead of the 530 Nm brake from the 410W3?<\/h3>\n

At 42,500 Nm drum torque, the loads suspended on the cable are 13% heavier than the 410W3 maximum capacity. The 530 Nm brake through the 413W3 ratio range would produce holding safety factors that fall below the 2.0x threshold required by several offshore classification societies for heavy lifts at the largest drum diameters. The 610 Nm brake restores the safety factor above 2.0 at every ratio and drum combination within the 413W3 operating envelope, ensuring compliance without requiring an external secondary brake.<\/p>\n<\/div>\n

\n

What hydraulic release pressure does the 610 Nm brake require?<\/h3>\n

Approximately 32-42 bar. The larger piston diameter absorbs the increased spring force without exceeding the release pressure range of the 530 Nm design (30-38 bar) by more than 4 bar. Most crane pilot circuits operating at 35-50 bar can release the 610 Nm brake without modification. Verify the pilot circuit maximum pressure before specifying \u2014 if the pilot system is limited to 35 bar, confirm with Korea Ever-Power that the specific 413W3 serial number will release fully at that pressure.<\/p>\n<\/div>\n

\n

Can the 413W3 brake components be shared with the 410W3 or 407 family?<\/h3>\n

No. The 610 Nm brake assembly uses a larger piston bore, different disc outer diameter, and different spring stack than the 530 Nm or 430 Nm assemblies. None of the internal brake components are interchangeable. If the fleet includes both 410W3 (530 Nm) and 413W3 (610 Nm) units, stock separate brake spare parts kits for each. The rotary union may share the same shaft seal dimensions (verify by serial number), but the piston, discs, and springs are unique to the 413W3.<\/p>\n<\/div>\n

\n

What is the maximum suspended load the 413W3 can hold at ratio 130 on a 600 mm PCD drum?<\/h3>\n

Brake at drum = 610 x 130 = 79,300 Nm. Maximum holdable line pull = 79,300 \/ 0.3 = 264,333 N. At SF = 2.0: working load = 264,333 \/ (2.0 x 9.81) = approximately 13,474 kg per line. With 8-part reeving: SWL = 13,474 x 8 = 107,792 kg. Adjusting for reeving efficiency (84%): effective SWL = approximately 90,545 kg (90.5 tonnes). This calculation is for the first cable layer \u2014 verify at the outer layer and include the cable weight for the final crane load chart.<\/p>\n<\/div>\n

\n

How does the 413W3 compare to using a 410W3 with an external drum brake?<\/h3>\n

An external drum brake (calliper or band type) acting on the drum cheek plate provides additional holding torque independent of the gearbox. However, it adds weight (40-80 kg), requires separate hydraulic supply, occupies deck or frame space, and introduces a separate maintenance item with its own inspection schedule. The 413W3 with its integrated 610 Nm brake achieves the same total holding capacity in a single self-contained unit inside the drum. For new-build cranes, the integrated approach is lighter and simpler. For existing cranes being upgraded from the 410W3, adding an external brake may be more practical than redesigning the drum housing for the larger 413W3 frame.<\/p>\n<\/div>\n

\n

What overhaul interval applies to the 413W3 at sustained mining production duty?<\/h3>\n

Mining production hoists at 200-400 skip cycles per day represent the most severe continuous duty in the winch drive application spectrum. Target first overhaul at 15,000-18,000 hours with oil sampling every 500 hours. The 610 Nm brake discs at mining duty rates (dynamic engagement on every cycle) typically require replacement at 8,000-12,000 hours \u2014 inspect every 1,500 hours. Seal replacement at 8,000-10,000 hours due to the mine shaft environment (dust, moisture, temperature cycling). The gear set typically survives to the first overhaul without replacement if the oil programme is followed. Contact La Cor\u00e9e toujours puissante<\/a> for a maintenance schedule calibrated to the specific mine duty profile and shaft depth.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Rapports de terrain<\/h2>\n
\n
\n
\n
K<\/div>\n
\n
Karl E. \u2014 Offshore Construction Vessel Crane Manager<\/div>\n
Verified Purchase \u00b7 Stavanger, Norway \u00b7 May 2026<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n<\/div>\n

50 t main hoist on an offshore construction vessel, 413W3 at ratio 140, dual motors. The 610 Nm brake was the specification driver \u2014 our DNV-GL surveyor calculated that the 410W3 530 Nm brake at this drum diameter and water depth (400 metres, 2,600 kg rope weight) gave a brake SF of 1.78. Our company standard requires 2.0 minimum. The 413W3 610 Nm brake gave us SF = 2.06 \u2014 compliant with 3% margin. The gearbox has completed two major installation campaigns totalling 4,200 operating hours. Oil analysis trending clean, brake holding test within 2% of factory data. The 610 Nm brake justified the housing upgrade from the 410 frame.<\/p>\n<\/div>\n

\n
\n
M<\/div>\n
\n
Michael D. \u2014 Mining Hoist Superintendent<\/div>\n
Achat v\u00e9rifi\u00e9<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n<\/div>\n

Production skip hoist at a copper mine, 420-metre shaft depth, 12-tonne skip, 300 cycles per day. 413W3 at ratio 150. The mine safety authority specifically required the 610 Nm brake class for our skip weight plus rope weight at full depth \u2014 the calculation showed 530 Nm was marginally compliant at SF = 1.55 but our inspector wanted 2.0 minimum for ore skips that share the shaft with personnel cages on separate schedules. The 610 Nm brake at ratio 150 gives us SF = 2.4. After 7,500 hours of 3-shift operation, the brake discs are at 70% remaining thickness \u2014 on track for replacement at approximately 11,000 hours, consistent with the duty cycle prediction.<\/p>\n<\/div>\n

\n
\n
S<\/div>\n
\n
Stefan B. \u2014 Steelworks Crane Maintenance Engineer<\/div>\n
Verified Purchase \u00b7 April 2026<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2606<\/div>\n<\/div>\n

40 t overhead crane in a steelworks hot bay, 413W3 at ratio 95. The crane holds 35-tonne ladles suspended for 20-40 minutes per heat while the furnace is tapped. The 610 Nm brake handles this extended static hold without drift \u2014 verified by laser position measurement over a 45-minute test hold. Mechanically the unit is performing well after 10 months. The 4-star reflects the operating environment: the ambient temperature in the hot bay reaches 55-60 deg C during casting, which pushes the gearbox oil temperature to 78-82 deg C \u2014 close to the 85 deg C limit. We installed an air-blast cooler on the drum housing to maintain oil temperature below 70 deg C. For steelworks applications, a published thermal derating chart for ambient temperatures above 40 deg C would help maintenance engineers like me specify the cooling requirement during the design phase rather than discovering it during commissioning.<\/p>\n<\/div>\n<\/div>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"

The brake steps up. For twelve models \u2014 from the 400W1 at 130 Nm through the 410W3 at 530 Nm \u2014 the winch drive planetary gearbox brake has climbed in increments within a design architecture shared across multiple models. The EP-413W3 breaks that ceiling. At 610 Nm, the 413W3 introduces a new brake tier that exists because the loads at 42,500 Nm drum torque are heavy enough and the consequences of a brake failure severe enough that the 530 Nm capacity of the 407\/410 families no longer provides an adequate safety margin at every ratio and drum combination. The 610 Nm brake through ratio 172 produces 104,920 Nm of holding torque at the drum \u2014 entering the territory where the brake can suspend 50+ tonnes on a standard PCD drum with classification-compliant safety factors.<\/div>","protected":false},"featured_media":959,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[969],"product_tag":[],"class_list":["post-952","product","type-product","status-publish","has-post-thumbnail","product_cat-winch-drive-planetary-gearbox","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/product\/952","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/comments?post=952"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/media\/959"}],"wp:attachment":[{"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/media?parent=952"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/product_brand?post=952"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/product_cat?post=952"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/fr\/wp-json\/wp\/v2\/product_tag?post=952"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}