{"id":929,"date":"2026-06-18T05:31:56","date_gmt":"2026-06-18T05:31:56","guid":{"rendered":"https:\/\/planetary-gearboxes.com\/?post_type=product&p=929"},"modified":"2026-06-18T05:31:56","modified_gmt":"2026-06-18T05:31:56","slug":"401w1-winch-drive-planetary-gearbox","status":"publish","type":"product","link":"https:\/\/planetary-gearboxes.com\/ru\/product\/401w1-winch-drive-planetary-gearbox\/","title":{"rendered":"\u041f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u044b\u0439 \u0440\u0435\u0434\u0443\u043a\u0442\u043e\u0440 \u043b\u0435\u0431\u0435\u0434\u043a\u0438 401W1 \u2014 \u043e\u0434\u043d\u043e\u0441\u0442\u0443\u043f\u0435\u043d\u0447\u0430\u0442\u044b\u0439"},"content":{"rendered":"
\n

<\/p>\n

\n
\n
\n
\n
PERSONNEL LIFTING RATED<\/div>\n

401W1 \u2014 When the Brake Capacity Decides the Model<\/h2>\n

The EP-400W1 and EP-401W1 share the same single-stage architecture and nearly the same gear ratio (6.09 vs 6.2). What separates them is the brake. The 401W1 integral 270 Nm fail-safe brake produces 1,674 Nm of holding torque at the drum \u2014 sufficient to hold personnel platforms, rescue baskets, and man-riding cages with the regulatory safety margins that lighter brakes cannot meet. For every \u043f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u044b\u0439 \u0440\u0435\u0434\u0443\u043a\u0442\u043e\u0440 \u043f\u0440\u0438\u0432\u043e\u0434\u0430 \u043b\u0435\u0431\u0435\u0434\u043a\u0438<\/a> application where human life depends on the brake, the 401W1 is the entry point.<\/p>\n<\/div>\n

\n
\n
\u0412\u044b\u0445\u043e\u0434\u043d\u043e\u0439 \u043a\u0440\u0443\u0442\u044f\u0449\u0438\u0439 \u043c\u043e\u043c\u0435\u043d\u0442<\/span>1,300 Nm<\/span><\/div>\n
Brake Torque<\/span>270 Nm<\/span><\/div>\n
Ratio \/ Weight<\/span>6.2 \/ 58 kg<\/span><\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n

At 1,300 Nm output, the 401W1 handles drum torques that the 400W1 (870 Nm) cannot reach \u2014 extending the single-stage winch drive envelope from approximately 540 kg maximum line pull on a 300 mm PCD drum up to approximately 800 kg. Combined with FEM M5 continuous-duty rating, 96% mechanical efficiency, and compatibility with axial piston, orbit, and electric motors, the 401W1 serves the mid-range hoisting applications on construction sites, offshore platforms, and marine vessels where the single-stage compactness (58 kg, short axial length) is as important as the torque and brake capacity.<\/p>\n<\/div>\n

\"401W1<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

401W1 Winch Drive Gearbox \u2014 Technical Parameters<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u041d\u043e\u043c\u0438\u043d\u0430\u043b\u044c\u043d\u044b\u0439 \u0432\u044b\u0445\u043e\u0434\u043d\u043e\u0439 \u043a\u0440\u0443\u0442\u044f\u0449\u0438\u0439 \u043c\u043e\u043c\u0435\u043d\u0442<\/td>\n1,300 Nm<\/td>\n<\/tr>\n
\u041f\u0435\u0440\u0435\u0434\u0430\u0442\u043e\u0447\u043d\u043e\u0435 \u0447\u0438\u0441\u043b\u043e<\/td>\n6.2 : 1 (single planetary stage)<\/td>\n<\/tr>\n
\u041c\u0430\u043a\u0441\u0438\u043c\u0430\u043b\u044c\u043d\u0430\u044f \u0432\u0445\u043e\u0434\u043d\u0430\u044f \u0441\u043a\u043e\u0440\u043e\u0441\u0442\u044c<\/td>\n1,000 rpm<\/td>\n<\/tr>\n
\u041c\u0430\u043a\u0441\u0438\u043c\u0430\u043b\u044c\u043d\u0430\u044f \u0441\u043a\u043e\u0440\u043e\u0441\u0442\u044c \u0432\u044b\u0432\u043e\u0434\u0430<\/td>\n25 \u043e\u0431\/\u043c\u0438\u043d (FEM M5, \u043d\u0435\u043f\u0440\u0435\u0440\u044b\u0432\u043d\u044b\u0439 \u0440\u0435\u0436\u0438\u043c \u0440\u0430\u0431\u043e\u0442\u044b)<\/td>\n<\/tr>\n
\u041c\u0435\u0445\u0430\u043d\u0438\u0447\u0435\u0441\u043a\u0430\u044f \u044d\u0444\u0444\u0435\u043a\u0442\u0438\u0432\u043d\u043e\u0441\u0442\u044c<\/td>\n\u2265 96%<\/td>\n<\/tr>\n
Static parking brake<\/td>\n270 Nm, spring-applied, hydraulic release<\/td>\n<\/tr>\n
\u041c\u043e\u043d\u0442\u0430\u0436<\/td>\nRotating housing flanges (internal drum integration)<\/td>\n<\/tr>\n
\u0421\u0443\u0445\u043e\u0439 \u0432\u0435\u0441<\/td>\nApprox. 58 kg<\/td>\n<\/tr>\n
Motor compatibility<\/td>\nAxial piston, orbit, electric (via adaptor)<\/td>\n<\/tr>\n
\u0421\u043c\u0430\u0437\u043a\u0430<\/td>\n\u041c\u0430\u0441\u043b\u044f\u043d\u0430\u044f \u0432\u0430\u043d\u043d\u0430, \u0440\u0430\u0437\u0431\u0440\u044b\u0437\u0433\u0438\u0432\u0430\u043d\u0438\u0435, \u0442\u0440\u0430\u043d\u0441\u043c\u0438\u0441\u0441\u0438\u043e\u043d\u043d\u043e\u0435 \u043c\u0430\u0441\u043b\u043e EP<\/td>\n<\/tr>\n
\u0420\u0430\u0431\u043e\u0447\u0430\u044f \u0442\u0435\u043c\u043f\u0435\u0440\u0430\u0442\u0443\u0440\u0430<\/td>\n-20 to +80 deg C (custom seals available)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Brake Safety Factor for Personnel Lifting \u2014 The Calculation That Determines Compliance<\/h2>\n

When a winch drive planetary gearbox lifts people, the brake is not a convenience feature \u2014 it is the last line of defence between a suspended work platform and a fatal fall. Every jurisdiction that permits man-riding winches requires a minimum static brake safety factor, and this calculation must be documented before the winch is certified for personnel use.<\/p>\n

\"401W1<\/p>\n

\n
\n

\u2460 Calculate the maximum suspended torque<\/h3>\n

T(load) = maximum personnel load x gravity x drum PCD radius. For a 4-person rescue basket at 400 kg (4 x 80 kg + 80 kg basket) on a 250 mm PCD drum: T(load) = 400 x 9.81 x 0.125 = 490 Nm at the drum.<\/p>\n<\/div>\n

\n

\u2461 Calculate the brake holding torque at the drum<\/h3>\n

T(brake at drum) = brake torque x gear ratio. For the 401W1: T(brake at drum) = 270 x 6.2 = 1,674 Nm at the drum.<\/p>\n<\/div>\n

\n

\u2462 Verify the safety factor<\/h3>\n

SF = T(brake at drum) \/ T(load) = 1,674 \/ 490 = 3.42<\/strong>. Most jurisdictions require SF \u2265 1.5 for personnel lifting (EN 14492, ASME B30.7). The 401W1 exceeds this by a wide margin. The same calculation with the 400W1 (130 Nm brake): SF = 792 \/ 490 = 1.62 \u2014 compliant but with far less margin for dynamic loads, cable weight, and safety factor degradation over brake disc life.<\/p>\n<\/div>\n<\/div>\n

Regulatory note: <\/span>
\nThe safety factor must be calculated at the OUTERMOST cable layer (highest PCD, highest torque demand) and must include the weight of the cable itself \u2014 not just the payload. For deep-shaft man-riding winches where 200+ metres of cable contribute significant weight, contact \u041a\u043e\u0440\u0435\u044f \u0412\u0435\u0447\u043d\u0430\u044f \u0421\u0438\u043b\u0430<\/a> for a verified brake capacity assessment.<\/span><\/div>\n<\/section>\n

<\/p>\n

\n

400W1 or 401W1 \u2014 When the Brake Makes the Decision, Not the Torque<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n
\u041a\u0440\u0438\u0442\u0435\u0440\u0438\u0439<\/th>\n400W1<\/th>\n401W1<\/th>\n<\/tr>\n<\/thead>\n
\u0412\u044b\u0445\u043e\u0434\u043d\u043e\u0439 \u043a\u0440\u0443\u0442\u044f\u0449\u0438\u0439 \u043c\u043e\u043c\u0435\u043d\u0442<\/td>\n870 Nm<\/td>\n1,300 Nm<\/td>\n<\/tr>\n
Brake torque<\/td>\n130 Nm<\/td>\n270 Nm (2.1x)<\/td>\n<\/tr>\n
Brake at drum (via ratio)<\/td>\n792 Nm<\/td>\n1,674 Nm (2.1x)<\/td>\n<\/tr>\n
\u041c\u0430\u0441\u0441\u0430<\/td>\n45 kg<\/td>\n58 kg<\/td>\n<\/tr>\n
Personnel lifting<\/td>\nLimited (marginal SF)<\/td>\nDesigned for it<\/td>\n<\/tr>\n
Best for<\/td>\nMaterials only, light loads<\/td>\nPeople + materials, offshore<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
Selection rule: <\/span>
\nIf the winch will ever lift people \u2014 even occasionally \u2014 specify the 401W1 regardless of whether the 400W1 torque rating would be sufficient for the load. The brake safety factor, not the output torque, is the compliance-determining parameter for personnel lifting applications.<\/span><\/div>\n<\/section>\n

<\/p>\n

\n

Winch Drive Applications Where the Brake Matters Most<\/h2>\n

\"Winch<\/p>\n

\n
\n

Personnel Hoists and Man-Riding Winches<\/h3>\n

Construction site personnel hoists, window-cleaning platforms, and industrial man-riding winches that lift 2-4 workers plus tools to heights of 10-60 metres. The 401W1 270 Nm brake provides the safety factor margin that regulatory bodies (EN 14492, LOLER, ASME B30.7) require for any winch carrying human occupants. The single-stage compactness at 58 kg allows integration into the narrow drum housings that personnel hoists use to minimise the shaft footprint on the building facade.<\/p>\n<\/div>\n

\n

Offshore Platform Winches<\/h3>\n

Utility winches on offshore oil and gas platforms, wind turbine installation vessels, and subsea construction spreads. These winches handle tool baskets, hose bundles, and equipment containers at heights and over water where a dropped load creates both a safety hazard and a marine pollution risk. The 401W1 sealed housing resists the salt spray and high-humidity environment that degrades open-gear winch mechanisms, while the 270 Nm brake meets the offshore industry standard for dual-brake or high-safety-factor single-brake installations on non-personnel lifting applications above water.<\/p>\n<\/div>\n

\n

Marine Anchor and Mooring Winches<\/h3>\n

Small vessel anchor winches and mooring line tensioners on workboats, barges, and coastal vessels. The 401W1 at 1,300 Nm handles anchor weights up to approximately 600 kg on a standard 300 mm drum, with the 270 Nm brake holding the anchor against current and wave drift forces when the vessel is at station. The \u043f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u044b\u0439 \u0440\u0435\u0434\u0443\u043a\u0442\u043e\u0440 \u043f\u043e\u0432\u043e\u0440\u043e\u0442\u043d\u043e\u0433\u043e \u043f\u0440\u0438\u0432\u043e\u0434\u0430<\/a> handles the deck crane rotation on the same vessel, and the marine auxiliary drives<\/a> power the capstan and windlass.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

\u0412 \u043b\u0438\u043d\u0435\u0439\u043a\u0435 \u043f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u044b\u0445 \u0440\u0435\u0434\u0443\u043a\u0442\u043e\u0440\u043e\u0432<\/h2>\n
\n
\n

\"\u041f\u043e\u0432\u043e\u0440\u043e\u0442\u043d\u044b\u0439<\/p>\n

\n

\u041f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u044b\u0439 \u0440\u0435\u0434\u0443\u043a\u0442\u043e\u0440 \u043f\u043e\u0432\u043e\u0440\u043e\u0442\u043d\u043e\u0433\u043e \u043f\u0440\u0438\u0432\u043e\u0434\u0430 \u2192<\/a><\/h3>\n

ZR series for crane boom rotation, offshore platform davit luffing, and vessel-mounted crane slewing.<\/p>\n<\/div>\n<\/div>\n

\n

\"\u041a\u043e\u043b\u0435\u0441\u043d\u044b\u0439<\/p>\n

\n

\u041f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u0430\u044f \u043a\u043e\u0440\u043e\u0431\u043a\u0430 \u043f\u0435\u0440\u0435\u0434\u0430\u0447 \u0441 \u043f\u0440\u0438\u0432\u043e\u0434\u043e\u043c \u043e\u0442 \u043a\u043e\u043b\u0435\u0441\u0430 \u2192<\/a><\/h3>\n

EP wheel drives for mobile crane travel and construction vehicle propulsion on the same project sites.<\/p>\n<\/div>\n<\/div>\n

\n

\"\u0413\u0443\u0441\u0435\u043d\u0438\u0447\u043d\u044b\u0439<\/p>\n

\n

\u041f\u043b\u0430\u043d\u0435\u0442\u0430\u0440\u043d\u044b\u0439 \u0440\u0435\u0434\u0443\u043a\u0442\u043e\u0440 \u043f\u0440\u0438\u0432\u043e\u0434\u0430 \u0433\u0443\u0441\u0435\u043d\u0438\u0446 \u2192<\/a><\/h3>\n

EP-SE series for crawler crane undercarriages and offshore platform support crawlers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Winch Drive Planetary Gearbox \u2014 Personnel Lifting and Safety FAQ<\/h2>\n
\n
\n

Does the 401W1 require a second independent brake for personnel lifting?<\/h3>\n

Most jurisdictions (EN 14492-2, ASME B30.7) require two independent braking mechanisms for personnel hoisting: a primary service brake and a secondary emergency brake. The 401W1 integral 270 Nm brake serves as one of these two brakes. The second brake is typically provided by a motor-mounted brake, a separate calliper brake on the drum, or a counterbalance valve with an independent pressure-holding function in the hydraulic circuit. The specific dual-brake configuration must be validated against the applicable local standard before the winch is certified for man-riding.<\/p>\n<\/div>\n

\n

What is the maximum personnel load the 401W1 can safely hold on a 300 mm PCD drum?<\/h3>\n

Brake holding torque at drum = 270 x 6.2 = 1,674 Nm. At 300 mm PCD (radius 0.15 m): maximum holdable line pull = 1,674 \/ 0.15 = 11,160 N = approximately 1,138 kg. With the regulatory 1.5x safety factor for personnel: maximum working load = 1,138 \/ 1.5 = 758 kg. This covers a 4-person work platform (4 x 80 kg workers + 80 kg platform + 120 kg tools and materials = 600 kg) with a 26% margin above the regulatory minimum.<\/p>\n<\/div>\n

\n

How does brake disc wear affect the safety factor over time?<\/h3>\n

As the brake disc wears, the spring compression decreases and the brake torque reduces proportionally. A new 401W1 brake delivers 270 Nm. At the end of the disc service life (minimum thickness), the brake torque may have degraded to approximately 220-240 Nm. The safety factor calculation must be performed at the END-OF-LIFE brake torque, not the new-condition value. Inspect the brake disc at every 2,500-hour interval and replace when it reaches the minimum thickness marked on the disc. For personnel lifting, the inspection interval is typically mandated at 500-1,000 hours by the applicable lifting equipment regulation.<\/p>\n<\/div>\n

\n

Can the 401W1 winch drive be used in an explosive atmosphere (ATEX\/IECEx)?<\/h3>\n

The standard 401W1 is not ATEX\/IECEx certified. For winches operating in explosive atmospheres (offshore oil and gas well service, chemical plants, grain handling), the hydraulic motor must be intrinsically safe (no electrical ignition source), and the gearbox housing must not generate surface temperatures exceeding the gas group T-class limit. The 401W1 housing surface temperature at continuous full-load duty is typically 40-55 deg C above ambient, which is within T4 class limits (135 deg C surface) in most ambient conditions. Contact \u041a\u043e\u0440\u0435\u044f \u0412\u0435\u0447\u043d\u0430\u044f \u0421\u0438\u043b\u0430<\/a> for a thermal assessment if ATEX compliance is required.<\/p>\n<\/div>\n

\n

What hydraulic motor displacement pairs best with the 401W1 for a 15 m\/min hoisting speed?<\/h3>\n

At 15 m\/min on a 250 mm PCD drum: required drum speed = 15 \/ (3.14 x 0.25) = 19.1 rpm. Motor speed = 19.1 x 6.2 = 118.4 rpm. If the available pump flow is 30 L\/min: motor displacement = 30,000 \/ 118.4 = 253 cc\/rev. This is a standard low-speed, high-torque orbit motor size (for example, Eaton Char-Lynn 2000 series, Danfoss OMP\/OMR 250). For higher hoisting speeds, increase the pump flow or reduce the motor displacement \u2014 the 401W1 input speed limit of 1,000 rpm is rarely the constraining factor in single-stage winch applications.<\/p>\n<\/div>\n

\n

How does the winch drive planetary gearbox handle shock loading from a sudden load pickup?<\/h3>\n

A sudden load pickup (for example, lifting a load off the ground with slack cable) generates a torque spike at the drum that can reach 2-3 times the steady-state lifting torque. The 401W1 is rated at 1,300 Nm continuous, with a peak capacity of approximately 2,600 Nm for transient events. This covers normal pickup shocks. However, snatch loading (deliberately jerking a stuck load free) can produce torques exceeding 5x steady-state \u2014 this is outside the gearbox design envelope and risks permanent gear damage. Use a load-limiting valve in the hydraulic circuit to prevent snatch-load torques from reaching the gearbox.<\/p>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

\u041f\u043e\u043b\u0435\u0432\u044b\u0435 \u043e\u0442\u0447\u0435\u0442\u044b<\/h2>\n
\n
\n
\n
\u041f<\/div>\n
\n
Peter D. \u2014 Lifting Equipment Inspector (LOLER)<\/div>\n
Verified Purchase \u00b7 Aberdeen, UK \u00b7 March 2026<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n<\/div>\n

Man-riding winch on an offshore platform utility crane. The 401W1 brake safety factor calculation came in at 2.8 for our maximum personnel load \u2014 well above the LOLER minimum of 1.5 and comfortably within our company standard of 2.0. The unit passed the 6-monthly thorough examination without any findings across the first two inspections. Brake engagement is consistent and the holding test (full load, 10-minute static hold) showed zero drift. For a personnel lifting application, that consistency is everything.<\/p>\n<\/div>\n

\n
\n
\u042f<\/div>\n
\n
Yuki T. \u2014 Marine Equipment OEM Engineer<\/div>\n
\u041f\u043e\u0434\u0442\u0432\u0435\u0440\u0436\u0434\u0435\u043d\u043d\u0430\u044f \u043f\u043e\u043a\u0443\u043f\u043a\u0430<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n<\/div>\n

Anchor winch for a 35-metre aluminium patrol vessel. The 401W1 handles a 280 kg anchor on 60 metres of 12 mm chain at 8 m\/min hoisting speed. The sealed housing was essential \u2014 the winch is mounted on the foredeck and takes green water over the bow in heavy weather. After 14 months including two typhoon seasons, the seals are intact and the oil is clean. The 270 Nm brake holds the anchor against 3-knot current drift without any creep. Class survey passed without comment.<\/p>\n<\/div>\n

\n
\n
\u0420<\/div>\n
\n
Rachel H. \u2014 Construction Safety Manager<\/div>\n
\u041f\u043e\u0434\u0442\u0432\u0435\u0440\u0436\u0434\u0435\u043d\u043d\u0430\u044f \u043f\u043e\u043a\u0443\u043f\u043a\u0430 \u00b7 \u041c\u0430\u0439 2026 \u0433.<\/div>\n<\/div>\n
\u2605\u2605\u2605\u2605\u2606<\/div>\n<\/div>\n

Window-cleaning platform winch for a 22-storey commercial building. The 401W1 lifts two technicians plus equipment (total 320 kg) at 12 m\/min. The brake safety factor certified at 3.1 \u2014 exceeding our insurance company minimum of 2.5 for suspended personnel platforms. The 4-star rating is because the technical documentation supplied with the unit did not include a pre-formatted brake safety factor certificate template. For personnel lifting, the end user always needs this document for their safety file and having a template pre-filled with the unit serial number, brake torque, and ratio would save approximately 2 hours of administrative time per installation. The drive itself is mechanically sound and the certification process was smooth once we prepared the documentation manually.<\/p>\n<\/div>\n<\/div>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"

The brake tells you who this winch drive is for. The EP-401W1 delivers 1,300 Nm through a single planetary stage \u2014 49% more torque than the entry-level 400W1 \u2014 but the real story is the 270 Nm fail-safe parking brake, which is more than double the 400W1 capacity. That doubling exists because the 401W1 serves applications where the load hanging on the cable is not a pallet of bricks but a platform carrying people. Personnel hoisting, offshore man-riding winches, and rescue davits operate under regulatory frameworks that demand brake holding capacity at 1.5-2.0 times the maximum suspended load \u2014 a margin the 130 Nm brake on the 400W1 simply cannot provide for heavier loads. The 401W1 winch drive planetary gearbox is the single-stage model that clears those regulatory thresholds.<\/div>","protected":false},"featured_media":939,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[969],"product_tag":[],"class_list":["post-929","product","type-product","status-publish","has-post-thumbnail","product_cat-winch-drive-planetary-gearbox","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/product\/929","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/comments?post=929"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/media\/939"}],"wp:attachment":[{"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/media?parent=929"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/product_brand?post=929"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/product_cat?post=929"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/planetary-gearboxes.com\/ru\/wp-json\/wp\/v2\/product_tag?post=929"}],"curies":[{"name":"WP","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}