{"id":645,"date":"2026-05-29T03:51:42","date_gmt":"2026-05-29T03:51:42","guid":{"rendered":"https:\/\/planetary-gearboxes.com\/?p=645"},"modified":"2026-05-29T03:55:12","modified_gmt":"2026-05-29T03:55:12","slug":"how-planetary-gearbox-works-mechanism-explained","status":"publish","type":"post","link":"https:\/\/planetary-gearboxes.com\/sk\/how-planetary-gearbox-works-mechanism-explained\/","title":{"rendered":"Ako funguje plan\u00e9tov\u00e1 prevodovka"},"content":{"rendered":"

<\/p>\n
\"how<\/p>\n
\n
Engineering Deep-Dive \u00b7 Mechanism \u00b7 Formula \u00b7 Efficiency Physics<\/div>\n

How a Planetary Gearbox Works \u2014
\nSun Gear, Planet Carrier and Ring Gear Explained<\/h1>\n

The planetary gear arrangement achieves what no parallel-shaft gearbox can match: maximum torque density in minimum space, through the physics of distributing load across multiple simultaneous contact points<\/strong>. This engineering explainer covers the mechanism, the gear ratio formula, the efficiency physics, and the design decisions that make planetary the standard for precision servo drives worldwide.<\/p>\n

Browse Korea Ever-Power EP Series \u2192
\n<\/a><\/p>\n<\/div>\n<\/section>\n

<\/p>\n

\n

The Four Components That Make a Planetary Gearbox Work<\/h2>\n
\n

<\/p>\n

\n
\n

Planetary Gear System \u2014 Cross-Section View<\/p>\n

<\/p>\n

\n
\n

<\/p>\n

<\/div>\n

<\/p>\n

RING GEAR (fixed)<\/div>\n

<\/p>\n

PLANET
\nP1<\/span><\/div>\n

<\/p>\n

PLANET
\nP2<\/span><\/div>\n

<\/p>\n

PLANET
\nP3<\/span><\/div>\n

<\/p>\n

SUN
\nGEAR
\nINPUT<\/span><\/div>\n

<\/p>\n

<\/div>\n

<\/p>\n

\n
\u2193<\/div>\n
PLANET CARRIER \u2192 OUTPUT<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
Sun gear \u2014 motor input shaft<\/div>\n
Planet gears (3\u00d7) \u2014 orbit + rotate<\/div>\n
Ring gear \u2014 fixed to housing<\/div>\n
Planet carrier \u2014 output shaft<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Understanding how a planetary gearbox works starts with its four mechanical components. A planetary gearbox \u2014 also called an epicyclic gearbox \u2014 consists of four mechanical components arranged in a concentric geometry that gives the design its exceptional torque density. Understanding how each component functions makes every selection, troubleshooting, and maintenance decision faster and more reliable.<\/p>\n

\n
\n

\u2600 Sun Gear \u2014 The Input Element<\/strong><\/p>\n

Mounted on the input shaft and driven directly by the motor. The sun gear meshes with all three planet gears simultaneously, transmitting motor torque outward to the planet gear set. Its tooth count (Z_sun) is the primary variable that sets the gear ratio alongside the ring gear tooth count.<\/p>\n<\/div>\n

\n

\u2699 Planet Gears \u2014 The Load-Sharing Elements<\/strong><\/p>\n

Three planet gears (standard configuration) mesh simultaneously with the sun gear on their inner radius and with the ring gear on their outer radius. Each planet gear rotates about its own axis while also orbiting the sun gear \u2014 this dual motion (rotation + revolution) is the kinematic source of the gear ratio. Critically: all three planets share the applied torque equally, so each planet tooth carries only one-third of the total load at any instant.<\/p>\n<\/div>\n

\n

\u2b21 Ring Gear \u2014 The Fixed Outer Reaction Element<\/strong><\/p>\n

The ring gear is the largest component, with internal teeth that mesh with the planet gears’ outer radius. In a standard planetary gearbox, the ring gear is fixed to the housing \u2014 it does not rotate. The planet gears roll against the inside of the ring gear as they orbit. The ring gear’s tooth count (Z_ring) sets the maximum possible gear ratio for a given sun gear size.<\/p>\n<\/div>\n

\n

\u21bb Planet Carrier \u2014 The Output Element<\/strong><\/p>\n

The planet carrier is the structural frame that holds all three planet gear axles. It rotates at the output speed as the planet gears orbit the sun gear. The output shaft is attached to the carrier. In a right-angle gearbox, the carrier shaft connects to a bevel stage that changes the output direction; in an inline gearbox, the carrier shaft is the direct output.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

POWER FLOW \u2014 INPUT TO OUTPUT<\/p>\n

Motor \u2192 [Sun Gear rotates] \u2192 [Planet Gears: rotate on own axis + orbit sun] \u2192 [Planet Carrier moves] \u2192 Output Shaft<\/div>\n

The ring gear is stationary (fixed to housing). The sun gear input drives the planets, which are constrained by the ring gear. The only remaining degree of freedom is the carrier’s orbital motion \u2014 which becomes the output. This constraint geometry is what produces the gear ratio.<\/p>\n<\/div>\n<\/section>\n

<\/p>\n

\n

How the Gear Ratio Is Calculated \u2014 The Willis Equation for Planetary Gearboxes<\/h2>\n
\n
\n

The gear ratio of a planetary gearbox with a fixed ring gear is given by the Willis equation \u2014 named after Robert Willis who systematised epicyclic gear analysis in 1841. For the standard configuration (ring gear fixed, sun gear input, carrier output):<\/p>\n

\n

WILLIS EQUATION \u2014 FIXED RING GEAR<\/p>\n

i = 1 + (Z_ring \/ Z_sun)<\/div>\n
Z_ring = number of teeth on the ring gear
\nZ_sun = number of teeth on the sun gear
\nPlanet tooth count does not appear in the ratio formula \u2014 planets are intermediate elements only<\/span><\/div>\n<\/div>\n

Worked example:<\/strong> A Korea Ever-Power EP-AB series gearbox at i=5:1 has a ring gear with Z_ring=96 teeth and a sun gear with Z_sun=24 teeth. Applying the formula: i = 1 + (96\/24) = 1 + 4 = 5:1. The planet gear count (typically Z_planet=36) does not affect the ratio \u2014 it affects load sharing and structural balance but not kinematics.<\/p>\n

Why single-stage maximum is approximately 10:1:<\/strong> The minimum practical sun gear has Z_sun=12 teeth (limited by tooth undercut). A ring gear cannot exceed approximately Z_ring=108 teeth at the same modulus without exceeding the housing diameter constraint. This gives a maximum single-stage ratio of approximately 1 + (108\/12) = 10:1 for standard-modulus precision planetary gearboxes.<\/p>\n

Multi-stage ratio multiplication: <\/strong>
\nTwo planetary stages in series multiply their individual ratios: i_total = i\u2081 \u00d7 i\u2082. A two-stage unit with i\u2081=5 and i\u2082=5 produces i_total=25:1. This is why Korea Ever-Power precision series cover 3:1 to 100:1 within the same product family \u2014 single-stage for i=3\u201310, two-stage for i=12\u2013100.<\/span><\/div>\n<\/div>\n
\n

Common Gear Ratios \u2014 Sun and Ring Gear Tooth Counts<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
Pomer (i)<\/th>\nZ_sun<\/th>\nZ_ring<\/th>\nPozn\u00e1mka<\/th>\n<\/tr>\n<\/thead>\n
3:1<\/td>\n36<\/td>\n72<\/td>\nLowest practical single-stage. High output speed.<\/td>\n<\/tr>\n
4:1<\/td>\n32<\/td>\n96<\/td>\nCommon for high-speed spindle drives.<\/td>\n<\/tr>\n
5:1<\/td>\n24<\/td>\n96<\/td>\nMost common single-stage ratio worldwide.<\/td>\n<\/tr>\n
7:1<\/td>\n18<\/td>\n108<\/td>\nHigher ratio with good tooth geometry.<\/td>\n<\/tr>\n
10:1<\/td>\n12<\/td>\n108<\/td>\nNear single-stage maximum. Small sun gear.<\/td>\n<\/tr>\n
25:1<\/td>\n\u2014<\/td>\n\u2014<\/td>\nTwo-stage: 5\u00d75. Most common two-stage ratio.<\/td>\n<\/tr>\n
100:1<\/td>\n\u2014<\/td>\n\u2014<\/td>\nTwo-stage: 10\u00d710. Upper limit of 2-stage range.<\/td>\n<\/tr>\n
10,000:1<\/td>\nFour-stage planetary (AH\/AHK series) \u2014 single sealed unit<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n
Planet tooth count: why it matters for load sharing, not ratio<\/div>\n

Planet gear tooth count must satisfy the assembly condition: (Z_ring + Z_sun) must be divisible by the number of planet gears (usually 3). For Z_ring=96 and Z_sun=24: (96+24)\/3 = 40 \u2014 integer, so 3 planets can be equally spaced. If this condition is not met, equal planet spacing is impossible and unequal load sharing results, reducing gearbox life.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Why Planetary Gearboxes Achieve \u226597% Efficiency \u2014 The Contact Mechanics Explained<\/h2>\n

\"Detaily<\/p>\n

\n
\n

One of the most searched questions \u2014 how does a planetary gearbox work with such high efficiency \u2014 has a direct answer in contact mechanics. The \u226597% single-stage efficiency of a precision planetary gearbox is not a design target achieved through optimisation \u2014 it is a consequence of the gear mesh contact mechanics. Understanding why efficiency is this high (and where the remaining 3% goes) explains the performance gap versus worm reducers, the slight efficiency drop from single to two-stage, and why hypoid gears sit between the two.<\/p>\n

Hertz Contact Stress and Rolling Friction<\/h3>\n

When two gear teeth mesh, they make contact along a line (for spur gears) or a small elliptical area (for helical gears). At the contact point, the teeth undergo elastic deformation \u2014 this is Hertzian contact. The power lost in this contact equals the friction force multiplied by the sliding velocity at the contact point.<\/p>\n

In a planetary gear mesh, the dominant contact is rolling<\/strong> \u2014 the gear teeth roll across each other with minimal sliding. Rolling friction coefficients for hardened steel on steel with gear oil are in the range 0.001\u20130.003. Compare this to the sliding friction in a worm gear (0.05\u20130.12) \u2014 20 to 40 times higher. This contact mechanics difference, not design cleverness, is why planetary gearboxes are fundamentally more efficient than worm reducers regardless of manufacturing quality.<\/p>\n

The remaining 2\u20133% loss in a planetary gearbox comes from: bearing drag (~1.5%), churning loss from the lubricant (~0.5%), and residual sliding at the tip and root of each gear tooth (~0.5\u20131%). All three losses scale with speed, temperature, and lubricant viscosity \u2014 which is why the efficiency specification is given for nominal operating conditions.<\/p>\n

\n

WHY 3 PLANETS = HIGHER EFFICIENCY THAN 1<\/p>\n

Single parallel-shaft gear pair:
\nContact force = Full torque \/ pitch radius
\nHertz stress \u221d \u221a(Contact force)3-planet planetary at same output torque:
\nEach planet contact force = 1\/3 of total
\nHertz stress per contact \u221d \u221a(1\/3) = 0.577\u00d7Lower stress \u2192 less deformation \u2192 less heat
\n\u2192 3 planets achieve same torque at
\n lower stress per tooth = longer life + less loss<\/span><\/div>\n<\/div>\n<\/div>\n
\n

Efficiency Comparison Across Gear Types<\/p>\n

\n\n\n\n\n\n\n\n\n\n
Typ prevodov\u00e9ho stup\u0148a<\/th>\nEfekt\u00edvnos\u0165<\/th>\nKontakt<\/th>\n\u03bc (friction)<\/th>\n<\/tr>\n<\/thead>\n
Planetary (\u226597%)<\/td>\n\u226597%<\/td>\nRolling<\/td>\n0.001\u20130.003<\/td>\n<\/tr>\n
Parallel-shaft helical<\/td>\n95\u201398%<\/td>\nRolling<\/td>\n0.003\u20130.006<\/td>\n<\/tr>\n
Bevel (spiral)<\/td>\n93\u201397%<\/td>\nRolling<\/td>\n0.005\u20130.010<\/td>\n<\/tr>\n
Hypoid (KF\/KH series)<\/td>\n94\u201396%<\/td>\nRoll+slide<\/td>\n0.01\u20130.04<\/td>\n<\/tr>\n
Worm (high ratio)<\/td>\n40\u201365%<\/td>\nSliding<\/td>\n0.05\u20130.12<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

\\<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Why two-stage efficiency drops to \u226594%: <\/strong>
\nEach gear stage multiplies the slight efficiency loss of the previous. Stage 1 at 97% passes 97% of input power to stage 2. Stage 2 at 97% passes 97% of that: 0.97 \u00d7 0.97 = 0.941 = 94.1% total. The additional bearing set between stages adds ~0.5% further bearing drag. This compounding explains exactly why Korea Ever-Power specifications show \u226597% single-stage and \u226594% two-stage \u2014 the mathematics of loss compounding, not a design limitation.<\/span><\/div>\n<\/section>\n

<\/p>\n

\n

Why Planetary Gearboxes Achieve 3\u20135\u00d7 Higher Torque Density Than Parallel-Shaft Designs<\/h2>\n
\n
\n

Torque density \u2014 the maximum output torque achievable per unit of gearbox volume or mass \u2014 is the property that makes planetary gearboxes the standard for robot joints, CNC machine tools, and any application where the drive must fit within a constrained envelope. The source of the high torque density is the multi-path power transmission geometry, and it is straightforward to derive from first principles.<\/p>\n

The first principles argument:<\/strong> Torque equals force multiplied by the lever arm radius (T = F \u00d7 r). For a given output torque requirement and a given pitch circle radius, the required tangential tooth force is fixed: F = T\/r. In a parallel-shaft gearbox, this full force is carried by a single tooth mesh contact. In a planetary gearbox, the same total torque is shared across three (or more) planet gear contacts simultaneously. Each contact carries only T\/(3r) of force \u2014 one-third of the parallel-shaft contact force.<\/p>\n

Gear tooth strength scales with the square of the tooth cross-sectional dimensions. If each tooth carries one-third the force, the tooth can be one-third the size at the same safety factor \u2014 or equivalently, a standard tooth can carry three times the force at the same stress level. This is why a planetary gearbox with a 220 mm body diameter can deliver 2,000 N\u00b7m output torque where a parallel-shaft helical gearbox of the same outer diameter could only deliver 400\u2013600 N\u00b7m.<\/p>\n

Ten\/T\u00e1\/To EP-AB precision inline series planetary gearbox<\/a> demonstrates this torque density directly: the EP-AB220 (220 mm body diameter) delivers up to 2,000 N\u00b7m output torque with P0 \u22641 arcmin backlash at i=3\u2013100. A parallel-shaft unit at the same outer diameter in the same precision class would require a substantially heavier and larger housing to achieve the same torque rating.<\/p>\n<\/div>\n

\n

<\/p>\n

\n
Torque Density Comparison \u2014 Same 150 mm OD Housing<\/div>\n
\n
\n
Planetary gearbox (EP-AB150)<\/span>
\n800 N\u00b7m<\/span><\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n
\n
Parallel-shaft helical (same OD)<\/span>
\n~250 N\u00b7m<\/span><\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n
\n
Spur gear pair (same OD)<\/span>
\n~160 N\u00b7m<\/span><\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n<\/div>\n

Approximate values \u2014 varies by design. Multi-path load sharing in planetary gearboxes delivers 3\u20135\u00d7 torque density advantage over single-path parallel-shaft designs.<\/p>\n<\/div>\n

\n
Coaxial output \u2014 the bonus advantage<\/div>\n

Because the sun gear input and the carrier output share the same centreline, planetary gearboxes have an inline (coaxial) geometry. The motor, gearbox, and driven machine can all align on one axis \u2014 eliminating the shaft offset of parallel-shaft designs and enabling the compact cylindrical assemblies used in robot arm joints, servo actuators, and electric vehicle axles.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/section>\n

<\/p>\n

\n

Single-Stage vs Multi-Stage \u2014 When to Add Planetary Stages and What Each Costs<\/h2>\n
\n
\n

Every additional planetary stage adds reduction ratio, reduces output speed, and increases output torque \u2014 but comes at the cost of housing length, additional bearing drag, and a small efficiency reduction. Understanding the trade-offs of each stage count helps in deciding whether a single-stage, two-stage, or multi-stage configuration is appropriate for a given application.<\/p>\n

\n
\n
Single Stage<\/div>\n
i = 3:1 to 10:1<\/div>\n