Toote kirjeldus
Toote kirjeldus
low idle low price stainless steel heavy duty helical gearbox Planetary gear reducers for DC motor
HangZhou Fubao Electromechanical Technology Co., Ltd. helical gearbox Planetary gear reducers is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CZPT and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
helical gearbox Planetary gear reducers characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the helical gearbox Planetary gear reducers. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
Compared with other reduction machines, helical gearbox Planetary gear reducers machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics,helical gearbox Planetary gear reducers is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Toote parameetrid
| WVB/WVBL series parameters | Model number | WVB042/WVBL50 | WVB60/WVBL70 | WVB/WVBL90 | WVB/WVBL120 | WVB142/WVBL155 | WVB180/WVBL205 | WVB220/WVBL235 |
| Nimiväljundmoment | 13-17Nm | 32-48Nm | 80-125Nm | 165-265Nm | 280-530Nm | 480-960Nm | 900-1360Nm | |
| Reduction ratio | L1: 3, 4, 5, 7, 10 | L2: 12, 15, 20, 25, 30, 35, 40, 50, 70, 100 | ||||||
| Planetary gear backlash | L1: P1≤3 P2≤5 L2: P1≤5 P2≤7 | |||||||
Detailsed fotod
Product Details
Other products
Ettevõtte profiil
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CZPT pursuit to make far-reaching contributions.
Factory Display
KKK
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
/* 10. märts 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1 }
| Rakendus: | Motor, Machinery, Agricultural Machinery, Palletizing Robot |
|---|---|
| Kõvadus: | Kõvenenud hambapind |
| Paigaldamine: | Vertikaalne tüüp |
| Kohandamine: |
Saadaval
| Kohandatud päring |
|---|
.shipping-cost-tm .tm-status-off{taust: puudub;täidis: 0;värv: #1470cc}
|
Saatmiskulud:
Hinnanguline kaubavedu ühiku kohta. |
saatmiskulu ja eeldatava tarneaja kohta. |
|---|
| Makseviis: |
|
|---|---|
|
Esialgne makse Täielik makse |
| Valuuta: | US$ |
|---|
| Tagastamine ja raha tagastamine: | Tagasimakset saate taotleda kuni 30 päeva jooksul pärast toodete kättesaamist. |
|---|
Planetaarkäigukastide kompaktsuse ja suure ülekandearvu saavutamise väljakutsed
Suure ülekandearvuga planetaarkäigukastide projekteerimine kompaktse vormiteguri säilitamise kõrval tekitab mitmeid väljakutseid käikude keeruka paigutuse ja erinevate tegurite tasakaalustamise vajaduse tõttu:
Ruumipiirangud: Ülekandearvu suurendamine nõuab tavaliselt rohkemate planetaarastmete lisamist, mille tulemuseks on täiendavad käigud ja komponendid. Piiratud saadaolev ruum võib aga muuta nende lisakomponentide paigaldamise keeruliseks ilma käigukasti kompaktsust kahjustamata.
Tõhusus: Kuna planetaarastmete arv suureneb suuremate ülekandearvude saavutamiseks, võib efektiivsuse osas olla vaja teha kompromisse. Täiendavad hammasrataste hambumised ja hõõrdekaod võivad vähendada üldist efektiivsust, mõjutades käigukasti jõudlust.
Koormuse jaotus: Koormuse jaotumine mitme astme vahel muutub suure ülekandearvuga planetaarkäigukastide projekteerimisel kriitilise tähtsusega. Õige koormuse jaotus tagab, et iga aste jagab koormust proportsionaalselt, vältides enneaegset kulumist ja tagades usaldusväärse töö.
Laagri paigutus: Planeediliste hammasrataste mitme astme mahutamiseks on vaja tõhusat laagrite paigutust pöörlevate komponentide toetamiseks. Vale laagrite valik või paigutus võib põhjustada suurenenud hõõrdumist, vähenenud efektiivsust ja võimalikke rikkeid.
Tootmistolerantsid: Kõrgete ülekandearvude saavutamiseks on vaja täpseid hammasprofiilide ja hammaste täpse hambumise tagamiseks täpseid tootmistolerantse. Igasugused kõrvalekalded võivad põhjustada müra, vibratsiooni ja jõudluse vähenemist.
Määrimine: Piisav määrimine muutub sujuva töö säilitamiseks ja hõõrdumise vähendamiseks ülioluliseks ülekandearvu suurenedes. Õige määrimise jaotumine mitme etapi vahel võib aga olla keeruline, mõjutades efektiivsust ja pikaealisust.
Müra ja vibratsioon: Suure ülekandearvuga planetaarkäigukastide keerukus võib suurendada müra ja vibratsiooni taset, kuna hammasrataste vahel on rohkem vastastikmõjusid. Müra ja vibratsiooni haldamine on oluline vastuvõetava jõudluse ja kasutajamugavuse tagamiseks.
Nende väljakutsete lahendamiseks kasutavad insenerid täiustatud projekteerimistehnikaid, ülitäpseid tootmisprotsesse, spetsiaalseid materjale, uuenduslikke laagrite paigutusi ja optimeeritud määrimisstrateegiaid. Õige tasakaalu saavutamine suure ülekandearvu ja kompaktsuse vahel eeldab nende tegurite hoolikat kaalumist, et tagada käigukasti töökindlus, efektiivsus ja jõudlus.
Maintenance Practices to Extend the Lifespan of Planetary Gearboxes
Proper maintenance is essential for ensuring the longevity and optimal performance of planetary gearboxes. Here are specific maintenance practices that can help extend the lifespan of planetary gearboxes:
1. Regular Inspections: Implement a schedule for routine visual inspections of the gearbox. Look for signs of wear, damage, oil leaks, and any abnormal conditions. Early detection of issues can prevent more significant problems.
2. Määrimine: Adequate lubrication is crucial for reducing friction and wear between gearbox components. Follow the manufacturer’s recommendations for lubricant type, viscosity, and change intervals. Ensure that the gearbox is properly lubricated to prevent premature wear.
3. Proper Installation: Ensure the gearbox is installed correctly, following the manufacturer’s guidelines and specifications. Proper alignment, torque settings, and clearances are critical to prevent misalignment-related wear and other issues.
4. Load Monitoring: Avoid overloading the gearbox beyond its designed capacity. Excessive loads can accelerate wear and reduce the gearbox’s lifespan. Regularly monitor the load conditions and ensure they are within the gearbox’s rated capacity.
5. Temperature Control: Maintain the operating temperature within the recommended range. Excessive heat can lead to accelerated wear and lubricant breakdown. Adequate ventilation and cooling measures may be necessary in high-temperature environments.
6. Seal and Gasket Inspection: Regularly check seals and gaskets for signs of leakage. Damaged seals can lead to lubricant loss and contamination, which can cause premature wear and gear damage.
7. Vibration Analysis: Use vibration analysis techniques to detect early signs of misalignment, imbalance, or other mechanical issues. Monitoring vibration levels can help identify problems before they lead to serious damage.
8. Preventive Maintenance: Establish a preventive maintenance program based on the gearbox’s operational conditions and usage. Perform scheduled maintenance tasks such as gear inspections, lubricant changes, and component replacements as needed.
9. Training and Documentation: Ensure that maintenance personnel are trained in proper gearbox maintenance procedures. Keep comprehensive records of maintenance activities, inspections, and repairs to track the gearbox’s condition and history.
10. Consult Manufacturer Guidelines: Always refer to the manufacturer’s maintenance and servicing guidelines specific to the gearbox model and application. Following these guidelines will help maintain warranty coverage and ensure best practices are followed.
By adhering to these maintenance practices, you can significantly extend the lifespan of your planetary gearbox, minimize downtime, and ensure reliable performance for your industrial machinery or application.
Ülekandearvu mõju väljundkiirusele ja pöördemomendile planetaarkäigukastides
Planetaarkäigukasti ülekandearvul on oluline mõju nii süsteemi väljundkiirusele kui ka pöördemomendile. Ülekandearvu defineeritakse kui veetava hammasratta (väljund) hammaste arvu ja vedava hammasratta (sisend) hammaste arvu suhe.
1. Väljundkiirus: Ülekandearv määrab käigukasti sisend- ja väljundkiiruste vahelise suhte. Suurem ülekandearv (rohkem hambaid väljundhammasrattal) põhjustab madalamat väljundkiirust võrreldes sisendkiirusega. Seevastu madalam ülekandearv (vähem hambaid väljundhammasrattal) põhjustab suuremat väljundkiirust võrreldes sisendkiirusega.
2. Väljundmoment: Ülekandearv mõjutab ka käigukasti väljundpöördemomenti. Ülekandearvu suurenemine võimendab väljundis edastatavat pöördemomenti, muutes selle sisendpöördemomendist kõrgemaks. Seevastu ülekandearvu vähenemine vähendab väljundpöördemomenti sisendpöördemomendi suhtes.
Ülekandearvu, väljundkiiruse ja väljundmomendi vaheline seos on pöördvõrdeline. See tähendab, et ülekandearvu suurenedes ja väljundkiiruse vähenedes suureneb proportsionaalselt ka väljundmoment. Vastupidiselt, ülekandearvu vähenedes ja väljundkiiruse suurenedes väheneb proportsionaalselt ka väljundmoment.
Oluline on märkida, et planetaarkäigukasti ülekandearvu valik hõlmab kompromisse väljundkiiruse ja pöördemomendi vahel. Insenerid valivad ülekandearvu, mis vastab konkreetse rakenduse nõuetele, võttes arvesse selliseid tegureid nagu soovitud kiirus, pöördemoment ja efektiivsus.
editor by CX 2024-01-31
